- Traditional porcelain fused to metal when strength is a factor, space metal lingual, or metal occlusal.
- Single crowns & Cantilever
- Custom implant abutments & CAD/CAM (Strauman, BioMet 3i, Nobel Biocare, Atlantis, BioHorizons)
- Overdentures
- Long span bridges
- Enamel 'wear' friendly
- Automatic Casting
- Laser Welding

We use Duceram^® Kiss Porcelain for our porcelain fused to metal restorations

6 Good Reasons For Using Duceram Kiss:

1. Economic Efficiency

• Reduced assortment
• Only fast moving powders in the assortment
• Fast firing cycles due to higher heating rate
• No long term cooling in combination with concept alloys
• Time saving during layering due to the 3 powders layering technique
• Low investment for the Lab due to the small assortment and comparatively low entry costs

2. Save color-reproduction due to the optimized coloring of the opaques and dentins in correlation to the v-shades

3. Due to combining different characteristics into one powder, like we did for the Power Chromas, it was possible to make the assortment so small

4. Aesthetic

• The opal incisal powders are completely reworked and patented
• In the past the opal effect was generated by small grains of zirconium oxide. The new opal effect is produced due to an decomposition inside the porcelain

5. Processing Reliability:

• By using classical high fusing veneering ceramics the opal effect is loosing his properties after several firing cycles
• By using Duceram Kiss the opal effect is absolutely firing stable

6. DeguDent Kiss:

• No long term cooling due to low CTE
• High distortion resistance, hence ideally suited for extensive implant restorations
• Fast firing cycles possible ( 80 °C/min )
• Light-colored oxide