If You Ask For:

You Get From Us:

And We Need From You:

All Porcelain Crown, Inlay, Onlay

IPS Empress  By Ivoclar

● Outstanding aesthetics and strength
● Excellent fit
● Biocompatible ceramic material
● Wear comparable to natural dentition
● Emax/Procera cementable (no bonding required)

● Rounded corners and angles
● Stumpf shades
● Study or Pre-op model
● 360 heavy chamfer margin(1.0-1.5mm)
● Adequate clearance
● 1.0 to 2.0mm minimum reduction of facial & lingual
● 1.5 to 2.0mm minimum reduction of incisal & occlusal
● Space for large connecting joints
(call for details)
 

All Porcelain Crown or Bridge

IPS E-max
By Ivoclar

Procera
By Nobel Biocare

Zirconia or Lava™ Crown or Bridge

Lava™ or Z-Max
By Dental Prosthetics

● Scanned & Milled in-house
● Natural beauty
● Unequaled porcelain strength
● Minimal chair time
(no bonding required)

● 360 heavy chamfer margin (1.0 to 1.5mm)
● 1.0 to 2.0mm minimum reduction of facial & lingual
● 1.5 to 2.0mm minimum reduction of incisal & occlusal
● Space for large connecting joints (call for details)
 

Composite

Cristobal +
By Ceramco

● Light-cured framework & veneering materials
● Indirect Composite
● High flexural strength
● Enamel-like abrasion

● Rounded corners and angles
● 1.0mm butt joint margin
● Inlays – wide enough in all areas for adequate strength
● 1.5 to 2.0mm occlusal clearance

PFM, PFG, P/SP, P/NP,
and Bridges

Porcelain Fused to High Noble Gold

● Ceramco Kiss Porcelain
● Porcelain covering metal at facial margin
● No metal showing
(unless requested)
● Pontics – modified/sanitary ridgelap
● Multiple pontics; anteriors - closed interproximals, posteriors - open interproximals
 

● The aesthetics of the porcelain is tied to the amount of reduction, thus, the more reduction, the better the aesthetics will be
● 1.5mm minimum reduction overall
● 1.0 to 1.5mm minimum reduction for shoulder porcelain margin
● Study or Pre-op models on anteriors as needed
 

Porcelain Fused to

Yellow Gold

Captek or Porcelain Fused to 90% High Noble Yellow Gold

· Produced by fully trained Captek technician

· Ceramco Kiss Porcelain

· Porcelain covering metal at margin – 360^o

· Exceptional porcelain-fused-to-metal aesthetics

· The aesthetics of the porcelain is tied to the amount of reduction,

   thus, the more reduction, the better the aesthetics will be

· 1.5mm minimum reduction overall 

· 1.0 to 1.5mm minimum reduction for shoulder porcelain margin

· Study or Pre-op models on anteriors as needed

Porc Shouldered, All Porcelain, or Porc Butt Margin

Porcelain Margin

· Facial metal cut back with all-porcelain

   aesthetic margin

· 90^° 1.0 to 1.5mm butt joint or heavy chamfer

FGC, FCG, Gold Crown Onlay

Full Gold Restoration cast in 60% Gold

· Optimal strength

· Kind to opposing dentition

· 0.5mm minimum reduction all around

FCC, F/SP, NP Crown

Silver-Colored Semi-precious Argenco W

· Nice fitting, economical crown

· 0.5mm minimum reduction all around

Gold Inlay

77% Type II Gold

· Nice fitting, easily burnished restoration

· 0.5mm minimum reduction throughout